This is the latest recevied telemetry packets stored in our database for station/object K7QEQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730489716 | 421 | 595 | 0 | 0 | 0 |
1730489596 | 449 | 595 | 0 | 0 | 0 |
1730489478 | 424 | 595 | 0 | 0 | 0 |
1730489357 | 420 | 595 | 0 | 0 | 0 |
1730489238 | 420 | 594 | 0 | 0 | 0 |
1730489119 | 483 | 594 | 0 | 0 | 0 |
1730488999 | 420 | 594 | 0 | 0 | 0 |
1730488880 | 437 | 594 | 0 | 0 | 0 |
1730488761 | 420 | 594 | 0 | 0 | 0 |
1730488641 | 420 | 593 | 0 | 0 | 0 |
1730488522 | 436 | 593 | 0 | 0 | 0 |
1730488403 | 465 | 593 | 0 | 0 | 0 |
1730488285 | 472 | 593 | 0 | 0 | 0 |
1730488164 | 421 | 593 | 0 | 0 | 0 |
1730488044 | 421 | 593 | 0 | 0 | 0 |
1730487925 | 420 | 592 | 0 | 0 | 0 |
1730487806 | 457 | 592 | 0 | 0 | 0 |
1730487687 | 421 | 592 | 0 | 0 | 0 |
1730487567 | 421 | 592 | 0 | 0 | 0 |
1730487448 | 461 | 592 | 0 | 0 | 0 |
1730487328 | 424 | 592 | 0 | 0 | 0 |
1730487209 | 456 | 593 | 0 | 0 | 0 |
1730487090 | 450 | 592 | 0 | 0 | 0 |
1730486851 | 458 | 591 | 0 | 0 | 0 |
1730486732 | 421 | 591 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)