This is the latest recevied telemetry packets stored in our database for station/object KD6RSQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1732315343 | 463 | 611 | 0 | 0 | 0 |
1732310161 | 464 | 617 | 0 | 0 | 0 |
1732310042 | 468 | 617 | 0 | 0 | 0 |
1732309922 | 466 | 618 | 0 | 0 | 0 |
1732309803 | 467 | 619 | 0 | 0 | 0 |
1732309683 | 467 | 619 | 0 | 0 | 0 |
1732309564 | 467 | 619 | 0 | 0 | 0 |
1732309444 | 470 | 618 | 0 | 0 | 0 |
1732309325 | 468 | 617 | 0 | 0 | 0 |
1732308966 | 463 | 615 | 0 | 0 | 0 |
1732308885 | 399 | 615 | 0 | 0 | 0 |
1732308765 | 398 | 615 | 0 | 0 | 0 |
1732308526 | 399 | 613 | 0 | 0 | 0 |
1732308407 | 399 | 613 | 0 | 0 | 0 |
1732308288 | 400 | 612 | 0 | 0 | 0 |
1732308168 | 402 | 613 | 0 | 0 | 0 |
1732308049 | 400 | 610 | 0 | 0 | 0 |
1732307810 | 399 | 608 | 0 | 0 | 0 |
1732307691 | 399 | 607 | 0 | 0 | 0 |
1732307571 | 400 | 606 | 0 | 0 | 0 |
1732307452 | 402 | 605 | 0 | 0 | 0 |
1732307333 | 405 | 603 | 0 | 0 | 0 |
1732307213 | 410 | 601 | 0 | 0 | 0 |
1732306975 | 471 | 598 | 0 | 0 | 0 |
1732303433 | 472 | 596 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)