This is the latest recevied telemetry packets stored in our database for station/object DL1LMH-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1731105631 | 2.18 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731104731 | 2.12 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731103831 | 2.12 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731102931 | 2.11 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731102031 | 2.17 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731101131 | 2.16 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731100231 | 2.02 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731099330 | 2.05 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731098430 | 2.13 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731097530 | 2.13 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731096630 | 2.12 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731095730 | 2.12 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731094830 | 2.18 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731093930 | 2.12 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731093030 | 2.19 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731092129 | 2.18 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731091229 | 2.2 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731090329 | 2.12 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731089429 | 2.18 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731088529 | 2.19 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731087629 | 2.19 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731086729 | 2.13 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731085828 | 2.18 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731084928 | 2.17 VDC | 4.98 VDC | 0 | 0 | 0 |
| 1731084028 | 2.12 VDC | 4.98 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)