This is the latest recevied telemetry packets stored in our database for station/object DM2OV-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1732286262 | 4.04 VDC | 0 | 0 | 0 | 0 |
1732285361 | 4.04 VDC | 0 | 0 | 0 | 0 |
1732283561 | 4.04 VDC | 0 | 0 | 0 | 0 |
1732282661 | 4.04 VDC | 0 | 0 | 0 | 0 |
1732281761 | 4.04 VDC | 0 | 0 | 0 | 0 |
1732280861 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732279961 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732279061 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732278161 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732277261 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732276361 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732275461 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732273661 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732272761 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732271861 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732270961 | 4.05 VDC | 0 | 0 | 0 | 0 |
1732270061 | 4.06 VDC | 0 | 0 | 0 | 0 |
1732269161 | 4.06 VDC | 0 | 0 | 0 | 0 |
1732268260 | 4.06 VDC | 0 | 0 | 0 | 0 |
1732267360 | 4.06 VDC | 0 | 0 | 0 | 0 |
1732266460 | 4.06 VDC | 0 | 0 | 0 | 0 |
1732265560 | 4.06 VDC | 0 | 0 | 0 | 0 |
1732263760 | 4.07 VDC | 0 | 0 | 0 | 0 |
1732262860 | 4.07 VDC | 0 | 0 | 0 | 0 |
1732261960 | 4.07 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)