APRS Track Direct

My position About ☰

reset

VE7XAK-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7XAK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1732324488	14.17 Volts	31.01 Deg.C
1732324401	14.17 Volts	31.5 Deg.C
1732324320	14.02 Volts	31.5 Deg.C
1732324280	14.02 Volts	31.5 Deg.C
1732324124	14.2 Volts	31.01 Deg.C
1732323980	14.26 Volts	31.01 Deg.C
1732323952	11.96 Volts	31.5 Deg.C
1732323912	12.29 Volts	31.01 Deg.C
1732323745	14.2 Volts	30.52 Deg.C
1732323724	14.23 Volts	31.01 Deg.C
1732323580	11.99 Volts	30.52 Deg.C
1732323499	14.29 Volts	30.03 Deg.C
1732323459	14.17 Volts	30.03 Deg.C
1732323419	14.02 Volts	31.5 Deg.C
1732323305	14.23 Volts	29.54 Deg.C
1732323175	12.11 Volts	29.54 Deg.C
1732323131	14.29 Volts	29.05 Deg.C
1732323058	11.99 Volts	29.05 Deg.C
1732323018	14.17 Volts	28.56 Deg.C
1732322979	14.23 Volts	28.56 Deg.C
1732322903	14.23 Volts	28.07 Deg.C
1732322873	14.17 Volts	28.07 Deg.C
1732322832	14.26 Volts	28.07 Deg.C
1732322753	14.17 Volts	27.59 Deg.C
1732322632	14.29 Volts	27.59 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0299, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)