This is the latest recevied telemetry packets stored in our database for station/object KC0OOO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1732292689 | 470 | 6.1 F | 0 V | 0 M | 0 |
| 1732292632 | 471 | 6 F | 0 V | 0 M | 0 |
| 1732292597 | 483 | 5.8 F | 0 V | 0 M | 0 |
| 1732292590 | 484 | 5.8 F | 0 V | 0 M | 0 |
| 1732292560 | 493 | 5.7 F | 0 V | 0 M | 0 |
| 1732292498 | 500 | 5.6 F | 0 V | 0 M | 0 |
| 1732292470 | 510 | 5.5 F | 0 V | 0 M | 0 |
| 1732292454 | 505 | 5.4 F | 0 V | 0 M | 0 |
| 1732292441 | 510 | 5.4 F | 0 V | 0 M | 0 |
| 1732292244 | 510 | 5.2 F | 0 V | 0 M | 0 |
| 1732291925 | 503 | 4.8 F | 0 V | 0 M | 0 |
| 1732291905 | 498 | 4.7 F | 0 V | 0 M | 0 |
| 1732291555 | 491 | 4.5 F | 0 V | 0 M | 0 |
| 1732291549 | 490 | 4.5 F | 0 V | 0 M | 0 |
| 1732291501 | 493 | 4.4 F | 0 V | 0 M | 0 |
| 1732291493 | 491 | 4.4 F | 0 V | 0 M | 0 |
| 1732291455 | 493 | 4.3 F | 0 V | 0 M | 0 |
| 1732291413 | 489 | 4.2 F | 0 V | 0 M | 0 |
| 1732291366 | 490 | 4.1 F | 0 V | 0 M | 0 |
| 1732291347 | 489 | 4.1 F | 0 V | 0 M | 0 |
| 1732234922 | 499 | 8.3 F | 0 V | 0 M | 0 |
| 1732226015 | 469 | 12.1 F | 0 V | 0 M | 0 |
| 1732225999 | 471 | 12.1 F | 0 V | 0 M | 0 |
| 1732225968 | 472 | 12.1 F | 0 V | 0 M | 0 |
| 1732225943 | 472 | 12.1 F | 0 V | 0 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)