This is the latest recevied telemetry packets stored in our database for station/object SQ9P-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | current* | temp* | humidity* | v batt* | v cpu* |
---|---|---|---|---|---|
1720340902 | 4 mA | 16 C | 87 % | 0.19 V | 3.58 V |
1720339975 | 3.09 mA | 15 C | 89 % | 0.19 V | 3.58 V |
1720339046 | 2.18 mA | 14 C | 90 % | 0.19 V | 3.59 V |
1720338118 | 2.6 mA | 14 C | 90 % | 0.19 V | 3.59 V |
1720337190 | 2.28 mA | 14 C | 90 % | 0.19 V | 3.59 V |
1720336262 | 1.9 mA | 14 C | 90 % | 0.19 V | 3.59 V |
1720335334 | 1.95 mA | 14 C | 89 % | 0.19 V | 3.59 V |
1720334406 | 2.57 mA | 14 C | 89 % | 0.19 V | 3.59 V |
1720333478 | 2.02 mA | 15 C | 88 % | 0.19 V | 3.58 V |
1720332549 | 2.78 mA | 15 C | 87 % | 0.16 V | 3.58 V |
1720331622 | 2.26 mA | 15 C | 86 % | 0.16 V | 3.59 V |
1720330694 | 2.79 mA | 15 C | 85 % | 0.16 V | 3.59 V |
1720329765 | 1.4 mA | 16 C | 84 % | 0.16 V | 3.59 V |
1720328837 | 1.57 mA | 16 C | 82 % | 0.16 V | 3.58 V |
1720327908 | 2.24 mA | 17 C | 78 % | 0.16 V | 3.59 V |
1720326980 | 2.4 mA | 17 C | 77 % | 0.16 V | 3.59 V |
1720326051 | 1.82 mA | 17 C | 77 % | 0.16 V | 3.59 V |
1720325123 | 1.41 mA | 17 C | 75 % | 0.16 V | 3.61 V |
1720324193 | 2.34 mA | 18 C | 72 % | 0.16 V | 3.61 V |
1720323265 | 1.33 mA | 18 C | 70 % | 0.16 V | 3.61 V |
1720322335 | 1.38 mA | 18 C | 70 % | 0.16 V | 3.61 V |
1720321406 | 1.41 mA | 18 C | 69 % | 0.16 V | 3.61 V |
1720320477 | 1.68 mA | 19 C | 68 % | 0.16 V | 3.61 V |
1720319548 | 1.4 mA | 18 C | 67 % | 0.16 V | 3.61 V |
1720318618 | 2.1 mA | 19 C | 66 % | 0.16 V | 3.59 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
v batt: 0, 0.02353, 0
v cpu: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)