This is the latest recevied telemetry packets stored in our database for station/object N374RS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730481237 | 477 | 621 | 0 | 0 | 0 |
1730481215 | 476 | 620 | 0 | 0 | 0 |
1730481168 | 476 | 620 | 0 | 0 | 0 |
1730481079 | 482 | 620 | 0 | 0 | 0 |
1730480991 | 481 | 620 | 0 | 0 | 0 |
1730480900 | 483 | 620 | 0 | 0 | 0 |
1730480810 | 481 | 620 | 0 | 0 | 0 |
1730480720 | 481 | 621 | 0 | 0 | 0 |
1730480632 | 488 | 623 | 0 | 0 | 0 |
1730480542 | 483 | 621 | 0 | 0 | 0 |
1730480453 | 483 | 622 | 0 | 0 | 0 |
1730480363 | 483 | 622 | 0 | 0 | 0 |
1730480274 | 481 | 623 | 0 | 0 | 0 |
1730480184 | 482 | 623 | 0 | 0 | 0 |
1730480094 | 482 | 624 | 0 | 0 | 0 |
1730480005 | 484 | 624 | 0 | 0 | 0 |
1730479826 | 476 | 624 | 0 | 0 | 0 |
1730479784 | 483 | 624 | 0 | 0 | 0 |
1730479772 | 483 | 624 | 0 | 0 | 0 |
1730479762 | 484 | 624 | 0 | 0 | 0 |
1730479674 | 481 | 623 | 0 | 0 | 0 |
1730479308 | 469 | 619 | 0 | 0 | 0 |
1730471823 | 468 | 615 | 0 | 0 | 0 |
1730471815 | 479 | 615 | 0 | 0 | 0 |
1730471805 | 481 | 615 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)