This is the latest recevied telemetry packets stored in our database for station/object OE1JLN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Solar* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732290015 | 3.7 VDC | 0.65 VDC | 0 | 0 | 0 |
| 1732289116 | 3.7 VDC | 2.29 VDC | 0 | 0 | 0 |
| 1732288218 | 3.71 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1732287320 | 3.71 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1732286421 | 3.71 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1732285522 | 3.71 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1732284625 | 3.71 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1732283726 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732282827 | 3.71 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1732281929 | 3.71 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732281031 | 3.71 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732280132 | 3.71 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1732278336 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732277439 | 3.71 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732276540 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732275642 | 3.71 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1732274744 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732273847 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732272949 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732271154 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732270257 | 3.72 VDC | 3.78 VDC | 0 | 0 | 0 |
| 1732269358 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732268459 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732267562 | 3.72 VDC | 3.77 VDC | 0 | 0 | 0 |
| 1732266665 | 3.71 VDC | 3.77 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Solar: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)