This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BAT* | SAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732265774 | 4.2 V | 25 No. | 0 | 0 | 0 |
| 1732265742 | 4.2 V | 25 No. | 0 | 0 | 0 |
| 1732265709 | 4.19 V | 19 No. | 0 | 0 | 0 |
| 1732265654 | 4.04 V | 26 No. | 0 | 0 | 0 |
| 1732265646 | 4.04 V | 26 No. | 0 | 0 | 0 |
| 1732265638 | 4.04 V | 26 No. | 0 | 0 | 0 |
| 1732265605 | 4.03 V | 25 No. | 0 | 0 | 0 |
| 1732265572 | 4.04 V | 26 No. | 0 | 0 | 0 |
| 1732265540 | 4.03 V | 26 No. | 0 | 0 | 0 |
| 1732265507 | 4.04 V | 26 No. | 0 | 0 | 0 |
| 1732265474 | 4.03 V | 25 No. | 0 | 0 | 0 |
| 1732265442 | 3.94 V | 25 No. | 0 | 0 | 0 |
| 1732265434 | 4.03 V | 23 No. | 0 | 0 | 0 |
| 1732265423 | 4.05 V | 24 No. | 0 | 0 | 0 |
| 1732265302 | 4.05 V | 26 No. | 0 | 0 | 0 |
| 1732265292 | 4.05 V | 27 No. | 0 | 0 | 0 |
| 1732265266 | 4.04 V | 27 No. | 0 | 0 | 0 |
| 1732265242 | 4.05 V | 27 No. | 0 | 0 | 0 |
| 1732265218 | 4.05 V | 26 No. | 0 | 0 | 0 |
| 1732265195 | 4.05 V | 26 No. | 0 | 0 | 0 |
| 1732265187 | 4.05 V | 26 No. | 0 | 0 | 0 |
| 1732265163 | 4.03 V | 26 No. | 0 | 0 | 0 |
| 1732265141 | 4.05 V | 26 No. | 0 | 0 | 0 |
| 1732265097 | 4.06 V | 26 No. | 0 | 0 | 0 |
| 1732265076 | 4.05 V | 25 No. | 0 | 0 | 0 |
*Used Equation Coefficients:
BAT: 0, 0.01, 0
SAT: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)