This is the latest recevied telemetry packets stored in our database for station/object IU2OMT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730469360 | 3.99 VDC | 0 | 0 | 0 | 0 |
1730467560 | 4.02 VDC | 0 | 0 | 0 | 0 |
1730465760 | 3.97 VDC | 0 | 0 | 0 | 0 |
1730463960 | 3.99 VDC | 0 | 0 | 0 | 0 |
1730462160 | 3.96 VDC | 0 | 0 | 0 | 0 |
1730460360 | 3.94 VDC | 0 | 0 | 0 | 0 |
1730458559 | 3.86 VDC | 0 | 0 | 0 | 0 |
1730456759 | 3.84 VDC | 0 | 0 | 0 | 0 |
1730454959 | 3.8 VDC | 0 | 0 | 0 | 0 |
1730453159 | 3.69 VDC | 0 | 0 | 0 | 0 |
1730451359 | 3.51 VDC | 0 | 0 | 0 | 0 |
1730449559 | 3.27 VDC | 0 | 0 | 0 | 0 |
1730447759 | 3.28 VDC | 0 | 0 | 0 | 0 |
1730429586 | 3.2 VDC | 0 | 0 | 0 | 0 |
1730427786 | 3.44 VDC | 0 | 0 | 0 | 0 |
1730425986 | 3.57 VDC | 0 | 0 | 0 | 0 |
1730424186 | 3.63 VDC | 0 | 0 | 0 | 0 |
1730422386 | 3.67 VDC | 0 | 0 | 0 | 0 |
1730420586 | 3.66 VDC | 0 | 0 | 0 | 0 |
1730418786 | 3.69 VDC | 0 | 0 | 0 | 0 |
1730416986 | 3.75 VDC | 0 | 0 | 0 | 0 |
1730415186 | 3.78 VDC | 0 | 0 | 0 | 0 |
1730413386 | 3.79 VDC | 0 | 0 | 0 | 0 |
1730411586 | 3.78 VDC | 0 | 0 | 0 | 0 |
1730409786 | 3.83 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)