This is the latest recevied telemetry packets stored in our database for station/object 9W2PFB-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732342322 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1732342038 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1732341774 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1732341275 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1732340976 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1732340636 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1732334268 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1732333944 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1732333499 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1732332349 | 3.97 VDC | 0 | 0 | 0 | 0 |
| 1732329948 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1732329539 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1732329232 | 3.77 VDC | 0 | 0 | 0 | 0 |
| 1732328838 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1732328590 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1732322847 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1732321692 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1732321272 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1732320933 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1732320444 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1732320089 | 3.67 VDC | 0 | 0 | 0 | 0 |
| 1732319781 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1732319590 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1732275117 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1732273396 | 3.75 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)