This is the latest recevied telemetry packets stored in our database for station/object IW2EJH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730452501 | 3.8 VDC | 4.16 VDC | 0 | 0 | 0 |
1730450701 | 3.78 VDC | 4.22 VDC | 0 | 0 | 0 |
1730448901 | 3.73 VDC | 4.18 VDC | 0 | 0 | 0 |
1730447101 | 3.77 VDC | 4.06 VDC | 0 | 0 | 0 |
1730445301 | 3.77 VDC | 4.1 VDC | 0 | 0 | 0 |
1730444415 | 3.75 VDC | 3.12 VDC | 0 | 0 | 0 |
1730441712 | 3.76 VDC | 2.44 VDC | 0 | 0 | 0 |
1730439912 | 3.76 VDC | 1.68 VDC | 0 | 0 | 0 |
1730438112 | 3.76 VDC | 1.7 VDC | 0 | 0 | 0 |
1730434511 | 3.77 VDC | 1.72 VDC | 0 | 0 | 0 |
1730430911 | 3.78 VDC | 1.68 VDC | 0 | 0 | 0 |
1730430011 | 3.75 VDC | 1.66 VDC | 0 | 0 | 0 |
1730428211 | 3.78 VDC | 1.66 VDC | 0 | 0 | 0 |
1730423710 | 3.79 VDC | 1.68 VDC | 0 | 0 | 0 |
1730422811 | 3.79 VDC | 1.66 VDC | 0 | 0 | 0 |
1730421011 | 3.75 VDC | 1.68 VDC | 0 | 0 | 0 |
1730420110 | 3.79 VDC | 1.68 VDC | 0 | 0 | 0 |
1730418310 | 3.8 VDC | 1.68 VDC | 0 | 0 | 0 |
1730416510 | 3.8 VDC | 1.7 VDC | 0 | 0 | 0 |
1730415611 | 3.8 VDC | 1.66 VDC | 0 | 0 | 0 |
1730414710 | 3.81 VDC | 1.68 VDC | 0 | 0 | 0 |
1730413811 | 3.81 VDC | 1.7 VDC | 0 | 0 | 0 |
1730412909 | 3.81 VDC | 1.72 VDC | 0 | 0 | 0 |
1730411109 | 3.82 VDC | 1.68 VDC | 0 | 0 | 0 |
1730409309 | 3.82 VDC | 1.74 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)