This is the latest recevied telemetry packets stored in our database for station/object VK5EU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1732335073 | 461 | 649 | 0 | 0 | 0 |
1732334955 | 459 | 649 | 0 | 0 | 0 |
1732334711 | 461 | 649 | 0 | 0 | 0 |
1732334592 | 461 | 649 | 0 | 0 | 0 |
1732334474 | 459 | 649 | 0 | 0 | 0 |
1732334352 | 454 | 648 | 0 | 0 | 0 |
1732334232 | 459 | 647 | 0 | 0 | 0 |
1732333992 | 452 | 642 | 0 | 0 | 0 |
1732333384 | 446 | 647 | 0 | 0 | 0 |
1732333269 | 453 | 646 | 0 | 0 | 0 |
1732333147 | 451 | 644 | 0 | 0 | 0 |
1732333027 | 442 | 641 | 0 | 0 | 0 |
1732332907 | 451 | 638 | 0 | 0 | 0 |
1732332787 | 448 | 632 | 0 | 0 | 0 |
1732331581 | 460 | 646 | 0 | 0 | 0 |
1732331460 | 458 | 644 | 0 | 0 | 0 |
1732330708 | 459 | 651 | 0 | 0 | 0 |
1732330589 | 458 | 651 | 0 | 0 | 0 |
1732330347 | 459 | 651 | 0 | 0 | 0 |
1732330227 | 460 | 650 | 0 | 0 | 0 |
1732330108 | 457 | 650 | 0 | 0 | 0 |
1732329988 | 460 | 650 | 0 | 0 | 0 |
1732329868 | 460 | 648 | 0 | 0 | 0 |
1732329748 | 463 | 647 | 0 | 0 | 0 |
1732329629 | 465 | 643 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)