This is the latest recevied telemetry packets stored in our database for station/object 9W2GZX-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1731643349 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1731643334 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1731643313 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1731643292 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1731643264 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1731643246 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1731643232 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1731643217 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1731643202 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1731643186 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1731643171 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1731643154 | 3.51 VDC | 0 | 0 | 0 | 0 |
| 1731643085 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1731642961 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1731642145 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1731641633 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1731626309 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1731626277 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1731626209 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1731625975 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1731625868 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1731625739 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1731625621 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1731625591 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1731624828 | 3.53 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)