This is the latest recevied telemetry packets stored in our database for station/object IZ4AKO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | PE1* | Tcpu* | Batt* | TS1* | TS2* |
---|---|---|---|---|---|
1717223050 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717222750 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717222470 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717222225 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717221935 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717221650 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717221375 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717221100 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717220835 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717220595 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717220355 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717220090 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717219790 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717219510 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717219260 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717219017 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717218732 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717218450 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717218165 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717217905 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717217630 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717217335 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717217085 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717216785 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
1717216512 | 0 None | 0 °C | 0 None | 25.5 °C | 0 °C |
*Used Equation Coefficients:
PE1: 0, 1, 0
Tcpu: 0, 1, 0
Batt: 0, 1, 0
TS1: 0, 0.1, 0
TS2: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)