This is the latest recevied telemetry packets stored in our database for station/object AH6GR-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730856851 | 375 | 0 | 0 | 0 | 0 |
1730855056 | 377 | 0 | 0 | 0 | 0 |
1730853262 | 374 | 0 | 0 | 0 | 0 |
1730851468 | 377 | 0 | 0 | 0 | 0 |
1730849674 | 378 | 0 | 0 | 0 | 0 |
1730847880 | 380 | 0 | 0 | 0 | 0 |
1730846086 | 378 | 0 | 0 | 0 | 0 |
1730844292 | 382 | 0 | 0 | 0 | 0 |
1730842497 | 381 | 0 | 0 | 0 | 0 |
1730840703 | 380 | 0 | 0 | 0 | 0 |
1730838909 | 385 | 0 | 0 | 0 | 0 |
1730837115 | 384 | 0 | 0 | 0 | 0 |
1730835321 | 380 | 0 | 0 | 0 | 0 |
1730833528 | 383 | 0 | 0 | 0 | 0 |
1730831734 | 384 | 0 | 0 | 0 | 0 |
1730829940 | 384 | 0 | 0 | 0 | 0 |
1730828147 | 386 | 0 | 0 | 0 | 0 |
1730826353 | 385 | 0 | 0 | 0 | 0 |
1730824559 | 385 | 0 | 0 | 0 | 0 |
1730822766 | 387 | 0 | 0 | 0 | 0 |
1730820972 | 385 | 0 | 0 | 0 | 0 |
1730819178 | 387 | 0 | 0 | 0 | 0 |
1730817385 | 380 | 0 | 0 | 0 | 0 |
1730815591 | 385 | 0 | 0 | 0 | 0 |
1730813797 | 385 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)