This is the latest recevied telemetry packets stored in our database for station/object SQ9P-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | current* | t* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732251262 | 3.8 mA | -3 C | 100 % | 0.07 V | 3.51 V |
| 1732250338 | 2.65 mA | -3 C | 100 % | 0.07 V | 3.51 V |
| 1732249414 | 3.83 mA | -3 C | 100 % | 0.09 V | 3.53 V |
| 1732248490 | 3.09 mA | -3 C | 100 % | 0.07 V | 3.51 V |
| 1732247565 | 3.42 mA | -3 C | 100 % | 0.07 V | 3.5 V |
| 1732246641 | 1.95 mA | -3 C | 100 % | 0.07 V | 3.53 V |
| 1732245716 | 1.73 mA | -3 C | 100 % | 0.07 V | 3.51 V |
| 1732244792 | 2.65 mA | -3 C | 100 % | 0.07 V | 3.5 V |
| 1732243868 | 3.01 mA | -3 C | 100 % | 0.07 V | 3.51 V |
| 1732242943 | 2.92 mA | -3 C | 100 % | 0.07 V | 3.51 V |
| 1732242019 | 2.32 mA | -3 C | 100 % | 0.07 V | 3.51 V |
| 1732241095 | 1.47 mA | -4 C | 100 % | 0.07 V | 3.51 V |
| 1732240170 | 1.68 mA | -4 C | 100 % | 0.07 V | 3.48 V |
| 1732239246 | 2.6 mA | -4 C | 100 % | 0.07 V | 3.48 V |
| 1732238322 | 2.64 mA | -4 C | 100 % | 0.07 V | 3.53 V |
| 1732237397 | 1.62 mA | -4 C | 100 % | 0.07 V | 3.53 V |
| 1732236473 | 2.4 mA | -4 C | 100 % | 0.07 V | 3.53 V |
| 1732235549 | 1.62 mA | -4 C | 100 % | 0.07 V | 3.55 V |
| 1732234624 | 2.56 mA | -4 C | 100 % | 0.07 V | 3.51 V |
| 1732233700 | 1.9 mA | -4 C | 100 % | 0.07 V | 3.55 V |
| 1732232776 | 2.37 mA | -4 C | 100 % | 0.07 V | 3.53 V |
| 1732231852 | 2.95 mA | -4 C | 100 % | 0.07 V | 3.53 V |
| 1732230927 | 2.7 mA | -4 C | 100 % | 0.07 V | 3.55 V |
| 1732230003 | 3.58 mA | -4 C | 100 % | 0.07 V | 3.51 V |
| 1732229079 | 2.6 mA | -4 C | 100 % | 0.07 V | 3.51 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
t: 0, 1, -128
Value3: 0, 1, 0
Value4: 0, 0.02353, 0
Value5: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)