This is the latest recevied telemetry packets stored in our database for station/object N7JVN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1731111543 | 12.51 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1731109746 | 13.1 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1731107950 | 13.13 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1731106153 | 13.1 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1731104356 | 13.13 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1731102559 | 13.1 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1731100763 | 13.13 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1731098966 | 13.1 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1731097170 | 13.1 Volts | 75.37 Deg.F | 0 | 0 | 0 |
| 1731095373 | 13.1 Volts | 74.49 Deg.F | 0 | 0 | 0 |
| 1731093577 | 13.1 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1731091780 | 13.1 Volts | 72.73 Deg.F | 0 | 0 | 0 |
| 1731086390 | 13.1 Volts | 70.09 Deg.F | 0 | 0 | 0 |
| 1731084594 | 13.04 Volts | 69.21 Deg.F | 0 | 0 | 0 |
| 1731082798 | 13.01 Volts | 69.21 Deg.F | 0 | 0 | 0 |
| 1731081001 | 12.45 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1731079205 | 12.45 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1731077408 | 12.45 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1731075612 | 12.45 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1731073815 | 12.45 Volts | 67.45 Deg.F | 0 | 0 | 0 |
| 1731072019 | 12.48 Volts | 68.33 Deg.F | 0 | 0 | 0 |
| 1731070223 | 12.48 Volts | 69.21 Deg.F | 0 | 0 | 0 |
| 1731068427 | 12.51 Volts | 70.09 Deg.F | 0 | 0 | 0 |
| 1731064835 | 13.1 Volts | 70.97 Deg.F | 0 | 0 | 0 |
| 1731063038 | 13.1 Volts | 71.85 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)