This is the latest recevied telemetry packets stored in our database for station/object EA7KEL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1732380888 | 3.98 VDC | 2.04 VDC | 0 | 0 | 0 |
1732379988 | 3.98 VDC | 2.02 VDC | 0 | 0 | 0 |
1732379088 | 3.98 VDC | 1.94 VDC | 0 | 0 | 0 |
1732378188 | 3.93 VDC | 1.9 VDC | 0 | 0 | 0 |
1732377287 | 4.03 VDC | 2 VDC | 0 | 0 | 0 |
1732376387 | 4.02 VDC | 1.86 VDC | 0 | 0 | 0 |
1732375487 | 4.03 VDC | 1.86 VDC | 0 | 0 | 0 |
1732374587 | 4.04 VDC | 1.7 VDC | 0 | 0 | 0 |
1732373687 | 4.02 VDC | 1.68 VDC | 0 | 0 | 0 |
1732372787 | 4.03 VDC | 1.72 VDC | 0 | 0 | 0 |
1732371887 | 4.03 VDC | 1.6 VDC | 0 | 0 | 0 |
1732370987 | 4.17 VDC | 1.56 VDC | 0 | 0 | 0 |
1732370090 | 4.15 VDC | 1.56 VDC | 0 | 0 | 0 |
1732369190 | 4.16 VDC | 1.56 VDC | 0 | 0 | 0 |
1732367386 | 4.16 VDC | 1.56 VDC | 0 | 0 | 0 |
1732366486 | 4.15 VDC | 1.56 VDC | 0 | 0 | 0 |
1732365586 | 4.06 VDC | 1.56 VDC | 0 | 0 | 0 |
1732364686 | 3.99 VDC | 1.68 VDC | 0 | 0 | 0 |
1732363796 | 3.93 VDC | 1.56 VDC | 0 | 0 | 0 |
1732363136 | 3.95 VDC | 1.56 VDC | 0 | 0 | 0 |
1732362889 | 3.96 VDC | 1.56 VDC | 0 | 0 | 0 |
1732361989 | 3.95 VDC | 1.56 VDC | 0 | 0 | 0 |
1732361085 | 3.92 VDC | 1.56 VDC | 0 | 0 | 0 |
1732361071 | 3.91 VDC | 1.56 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)