This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TEMP* | HUM* | BARO* | BAT* | SAT* |
---|---|---|---|---|---|
1720029145 | 28.37 C | 46.27 % | 1008.1 hPa | 4.01 V | 7 |
1720029104 | 28.31 C | 45.96 % | 1008.2 hPa | 4.02 V | 7 |
1720028816 | 28.1 C | 43.95 % | 1008.2 hPa | 4.02 V | 6 |
1720028768 | 28.19 C | 44.67 % | 1008.3 hPa | 4.02 V | 5 |
1720028462 | 27.84 C | 41.37 % | 1008.3 hPa | 4.03 V | 6 |
1720028443 | 27.86 C | 41.5 % | 1008.3 hPa | 4.03 V | 5 |
1720028298 | 28.18 C | 43.32 % | 1008.3 hPa | 4.03 V | 7 |
1720028285 | 28.18 C | 43.66 % | 1008.3 hPa | 4.03 V | 6 |
1720027979 | 27.86 C | 40.09 % | 1008.2 hPa | 4.03 V | 4 |
1720027961 | 27.87 C | 40.57 % | 1008.2 hPa | 4.03 V | 4 |
1720027952 | 27.87 C | 40.57 % | 1008.2 hPa | 4.03 V | 4 |
1720027934 | 27.88 C | 40.43 % | 1008.2 hPa | 4.03 V | 4 |
1720027916 | 27.89 C | 40.8 % | 1008.1 hPa | 4.03 V | 5 |
1720027886 | 27.96 C | 40.98 % | 1008.2 hPa | 4.02 V | 5 |
1720027872 | 27.97 C | 41.23 % | 1008.1 hPa | 4.04 V | 4 |
1720027567 | 28.36 C | 45.29 % | 1008.2 hPa | 4.04 V | 6 |
1720027555 | 28.37 C | 45.49 % | 1008.2 hPa | 4.04 V | 5 |
1720027539 | 28.3 C | 44.68 % | 1008.2 hPa | 4.04 V | 5 |
1720027523 | 28.29 C | 44.34 % | 1008.2 hPa | 4.04 V | 5 |
1720027510 | 28.26 C | 44.13 % | 1008.2 hPa | 4.04 V | 6 |
1720027256 | 28.06 C | 40.76 % | 1008.4 hPa | 4.05 V | 0 |
1720027168 | 28.18 C | 41.78 % | 1008.5 hPa | 4.05 V | 4 |
1720026862 | 28.73 C | 45.41 % | 1008.5 hPa | 4.07 V | 4 |
1720026846 | 28.73 C | 45.51 % | 1008.5 hPa | 4.07 V | 4 |
1720026838 | 28.7 C | 45.24 % | 1008.6 hPa | 4.07 V | 5 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
BAT: 0, 0.001, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)