This is the latest recevied telemetry packets stored in our database for station/object VA2AIG-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vbat* | Ibat* | Text* | Pres* | Humd* |
---|---|---|---|---|---|
1732321809 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732320408 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732318508 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732316608 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732314708 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732307108 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732305208 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732303308 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732297608 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732295708 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732293808 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732290008 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732286208 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732285807 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732284308 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732284008 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732282407 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732280507 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732278607 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732276707 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732274807 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732273207 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732271407 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732271007 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
1732269607 | 0 Volt | 0 ma | 0 C | 0 Pa | 0 % |
*Used Equation Coefficients:
Vbat: 0, 0.01, 0
Ibat: 0, 1, -2000
Text: 0, 0.1, -50
Pres: 0, 20, 0
Humd: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)