This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1732286400 | 1397 | 63.5 | 31.6 | 55.2 | 0 |
1732285503 | 1396 | 63.3 | 31.1 | 55 | 0 |
1732284601 | 1397 | 62.9 | 31.1 | 54.5 | 0 |
1732283702 | 1396 | 62.6 | 31.1 | 54 | 0 |
1732282800 | 1396 | 62.6 | 31.1 | 54 | 0 |
1732281902 | 1397 | 62.3 | 31.1 | 53.9 | 0 |
1732281001 | 1396 | 62.3 | 31.1 | 53.7 | 0 |
1732280102 | 1397 | 62 | 31.1 | 53.6 | 0 |
1732279200 | 1397 | 61.9 | 30.6 | 53.4 | 0 |
1732278302 | 1396 | 61.8 | 31.1 | 53.3 | 0 |
1732277402 | 1397 | 61.6 | 31.1 | 53 | 0 |
1732276503 | 1396 | 61.6 | 30.6 | 53 | 0 |
1732275601 | 1397 | 61.5 | 30.6 | 53 | 0 |
1732274704 | 1396 | 61.5 | 30.6 | 52.9 | 0 |
1732273802 | 1397 | 61.6 | 30.6 | 52.9 | 0 |
1732272904 | 1397 | 61.6 | 31.1 | 52.9 | 0 |
1732272001 | 1396 | 61.7 | 31.1 | 53 | 0 |
1732271102 | 1397 | 61.7 | 31.1 | 52.9 | 0 |
1732270202 | 1396 | 61.8 | 30.6 | 53.2 | 0 |
1732269302 | 1397 | 61.7 | 31.1 | 53 | 0 |
1732268401 | 1397 | 61.7 | 31.1 | 53 | 0 |
1732267503 | 1397 | 61.7 | 31.1 | 53.3 | 0 |
1732266602 | 1397 | 61.7 | 30.6 | 53.3 | 0 |
1732265703 | 1396 | 61.7 | 30.6 | 53.2 | 0 |
1732264801 | 1397 | 61.8 | 31.1 | 53.2 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)