This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | CPU* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720331142 | 13.3 Volts | 47 DegC | 0 | 0 | 0 |
1720327543 | 13.8 Volts | 48 DegC | 0 | 0 | 0 |
1720323942 | 13.7 Volts | 48 DegC | 0 | 0 | 0 |
1720320343 | 13.6 Volts | 48 DegC | 0 | 0 | 0 |
1720316743 | 13.4 Volts | 47 DegC | 0 | 0 | 0 |
1720313142 | 13.7 Volts | 44 DegC | 0 | 0 | 0 |
1720309542 | 13.1 Volts | 40 DegC | 0 | 0 | 0 |
1720305943 | 13 Volts | 37 DegC | 0 | 0 | 0 |
1720302343 | 12.2 Volts | 36 DegC | 0 | 0 | 0 |
1720298743 | 12.1 Volts | 37 DegC | 0 | 0 | 0 |
1720295142 | 12.1 Volts | 36 DegC | 0 | 0 | 0 |
1720291542 | 12.1 Volts | 37 DegC | 0 | 0 | 0 |
1720287942 | 12.2 Volts | 37 DegC | 0 | 0 | 0 |
1720284343 | 12.2 Volts | 36 DegC | 0 | 0 | 0 |
1720280743 | 12.3 Volts | 37 DegC | 0 | 0 | 0 |
1720277142 | 12.2 Volts | 37 DegC | 0 | 0 | 0 |
1720273543 | 12.2 Volts | 37 DegC | 0 | 0 | 0 |
1720269942 | 12.2 Volts | 38 DegC | 0 | 0 | 0 |
1720266342 | 12.3 Volts | 39 DegC | 0 | 0 | 0 |
1720262743 | 12.4 Volts | 39 DegC | 0 | 0 | 0 |
1720259143 | 12.3 Volts | 39 DegC | 0 | 0 | 0 |
1720255543 | 12.5 Volts | 42 DegC | 0 | 0 | 0 |
1720255205 | 12.4 Volts | 43 DegC | 0 | 0 | 0 |
1720254926 | 12.4 Volts | 44 DegC | 0 | 0 | 0 |
1720254175 | 12.5 Volts | 43 DegC | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
CPU: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)