This is the latest recevied telemetry packets stored in our database for station/object G4DDP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730477567 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730475767 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730473967 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730472167 | 0.29 VDC | 2.1 VDC | 0 | 0 | 0 |
1730470367 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730468567 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730466767 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730464967 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730463166 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730461366 | 0.29 VDC | 4.98 VDC | 0 | 0 | 0 |
1730459566 | 0.29 VDC | 4.5 VDC | 0 | 0 | 0 |
1730457766 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730455966 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730454165 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730452365 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730450564 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730448764 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730446964 | 0.29 VDC | 2.36 VDC | 0 | 0 | 0 |
1730445164 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730443364 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730441564 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730439764 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730437963 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730436163 | 0.29 VDC | 5.4 VDC | 0 | 0 | 0 |
1730434363 | 0.29 VDC | 2.04 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)