This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | SAT* | HDOP* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720236753 | 16 | 1.44 | 0 | 0 | 0 |
1720236444 | 19 | 1.01 | 0 | 0 | 0 |
1720236135 | 18 | 0.99 | 0 | 0 | 0 |
1720235825 | 17 | 1.3 | 0 | 0 | 0 |
1720235516 | 18 | 2.02 | 0 | 0 | 0 |
1720235207 | 16 | 1.47 | 0 | 0 | 0 |
1720234898 | 15 | 1.23 | 0 | 0 | 0 |
1720234589 | 13 | 1.48 | 0 | 0 | 0 |
1720234280 | 14 | 2.23 | 0 | 0 | 0 |
1720233971 | 15 | 1.23 | 0 | 0 | 0 |
1720233662 | 14 | 1.1 | 0 | 0 | 0 |
1720233353 | 12 | 1.91 | 0 | 0 | 0 |
1720233044 | 14 | 1.67 | 0 | 0 | 0 |
1720232735 | 14 | 3.03 | 0 | 0 | 0 |
1720232426 | 13 | 1.33 | 0 | 0 | 0 |
1720232117 | 15 | 0.97 | 0 | 0 | 0 |
1720231808 | 15 | 1.24 | 0 | 0 | 0 |
1720231499 | 12 | 1.42 | 0 | 0 | 0 |
1720231190 | 14 | 0.99 | 0 | 0 | 0 |
1720230881 | 14 | 1.33 | 0 | 0 | 0 |
1720230572 | 15 | 1.43 | 0 | 0 | 0 |
1720230263 | 15 | 0.98 | 0 | 0 | 0 |
1720229953 | 16 | 1 | 0 | 0 | 0 |
1720229644 | 15 | 1.04 | 0 | 0 | 0 |
1720229335 | 16 | 0.86 | 0 | 0 | 0 |
*Used Equation Coefficients:
SAT: 0, 1, 0
HDOP: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)