This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1732215664 | 4 V | 1.44 V | 182 mW | 22.4 degC | 100900 Pa |
| 1732213848 | 4.01 V | 1.44 V | 86 mW | 22.5 degC | 100875 Pa |
| 1732212004 | 4.01 V | 1.44 V | 86 mW | 22.3 degC | 100850 Pa |
| 1732210191 | 4 V | 1.44 V | 88 mW | 22.8 degC | 100875 Pa |
| 1732208359 | 4 V | 1.44 V | 96 mW | 23 degC | 100875 Pa |
| 1732206546 | 3.86 V | 1.41 V | 212 mW | 23.1 degC | 100862.5 Pa |
| 1732204713 | 4.06 V | 1.45 V | 30 mW | 23.1 degC | 100900 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)