APRS Track Direct

My position About ☰

reset

VE7EOL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7EOL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battery*	Temp*
1731018885	13.89 Volts	38.83 Deg.C
1731018837	14.09 Volts	38.34 Deg.C
1731018795	14.3 Volts	38.34 Deg.C
1731018788	14.09 Volts	37.85 Deg.C
1731018743	14.03 Volts	37.85 Deg.C
1731018732	14.3 Volts	37.85 Deg.C
1731018711	14.03 Volts	37.85 Deg.C
1731018706	14.03 Volts	37.85 Deg.C
1731018622	13.6 Volts	38.34 Deg.C
1731016785	14.27 Volts	24.16 Deg.C
1731016720	14.33 Volts	23.18 Deg.C
1731016697	14.27 Volts	22.7 Deg.C
1731016660	14.15 Volts	22.21 Deg.C
1731016630	14.24 Volts	21.72 Deg.C
1731016612	14.56 Volts	21.23 Deg.C
1731016601	14.42 Volts	21.23 Deg.C
1731016581	14.33 Volts	21.23 Deg.C
1731016480	14.06 Volts	19.27 Deg.C
1731016453	14.15 Volts	18.29 Deg.C
1731016448	14.15 Volts	18.29 Deg.C
1731016438	14.21 Volts	17.81 Deg.C
1731016420	14.24 Volts	17.81 Deg.C
1731016415	14.59 Volts	17.81 Deg.C
1731016411	14.21 Volts	17.32 Deg.C
1731016401	14.3 Volts	17.32 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)