This is the latest recevied telemetry packets stored in our database for station/object W4EXB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1730463499 | 11.66 | 22.09 | 0 | 0 | 0 |
| 1730460814 | 11.66 | 22.57 | 0 | 0 | 0 |
| 1730458127 | 11.66 | 22.57 | 0 | 0 | 0 |
| 1730455442 | 11.66 | 22.57 | 0 | 0 | 0 |
| 1730452757 | 11.66 | 23.06 | 0 | 0 | 0 |
| 1730450072 | 11.66 | 23.06 | 0 | 0 | 0 |
| 1730447387 | 11.66 | 23.54 | 0 | 0 | 0 |
| 1730444701 | 11.66 | 23.54 | 0 | 0 | 0 |
| 1730442015 | 11.66 | 24.03 | 0 | 0 | 0 |
| 1730439329 | 11.69 | 24.51 | 0 | 0 | 0 |
| 1730436643 | 11.69 | 24.99 | 0 | 0 | 0 |
| 1730433957 | 11.66 | 24.99 | 0 | 0 | 0 |
| 1730431271 | 11.69 | 25.48 | 0 | 0 | 0 |
| 1730428585 | 11.69 | 25.96 | 0 | 0 | 0 |
| 1730425898 | 11.69 | 25.96 | 0 | 0 | 0 |
| 1730420526 | 11.69 | 27.41 | 0 | 0 | 0 |
| 1730419680 | 11.69 | 29.35 | 0 | 0 | 0 |
| 1730415153 | 11.69 | 29.35 | 0 | 0 | 0 |
| 1730409779 | 11.69 | 34.67 | 0 | 0 | 0 |
| 1730407090 | 11.69 | 36.13 | 0 | 0 | 0 |
| 1730404401 | 11.69 | 36.61 | 0 | 0 | 0 |
| 1730401713 | 11.69 | 36.61 | 0 | 0 | 0 |
| 1730399023 | 11.69 | 35.16 | 0 | 0 | 0 |
| 1730396335 | 11.69 | 34.19 | 0 | 0 | 0 |
| 1730393648 | 11.69 | 32.25 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0306, 0
Value2: 0, 0.484, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)