APRS Track Direct

My position About ☰

reset

KC3ARY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery Voltage*	Battery Current*	Load Current*	Solar Voltage*
1732254108	11.41 V	279 mA	-251 mA	0 V
1732253508	11.81 V	282 mA	-255 mA	0 V
1732252908	12.16 V	290 mA	-264 mA	0 V
1732252308	12.25 V	296 mA	-270 mA	0.01 V
1732251708	12.28 V	301 mA	-277 mA	0.01 V
1732251106	12.3 V	300 mA	-274 mA	0 V
1732250508	12.31 V	301 mA	-275 mA	0.01 V
1732249908	12.33 V	297 mA	-271 mA	0.02 V
1732249308	12.34 V	295 mA	-269 mA	0.02 V
1732248708	12.35 V	291 mA	-265 mA	0.01 V
1732248108	12.36 V	296 mA	-270 mA	0.02 V
1732247506	12.37 V	297 mA	-271 mA	0.02 V
1732246908	12.38 V	299 mA	-273 mA	0.02 V
1732246308	12.39 V	297 mA	-273 mA	0.02 V
1732245708	12.4 V	289 mA	-264 mA	0.02 V
1732245108	12.41 V	287 mA	-261 mA	0.02 V
1732244509	12.42 V	291 mA	-265 mA	0.02 V
1732243907	12.42 V	291 mA	-264 mA	0.02 V
1732243308	12.43 V	287 mA	-259 mA	0.02 V
1732242708	12.44 V	290 mA	-260 mA	0.02 V
1732242107	12.45 V	287 mA	-261 mA	0.02 V
1732241507	12.46 V	289 mA	-263 mA	0.02 V
1732240907	12.46 V	296 mA	-270 mA	0.02 V
1732240305	12.47 V	294 mA	-268 mA	0.03 V
1732239707	12.48 V	294 mA	-268 mA	0.03 V

*Used Equation Coefficients:

Battery Voltage: 0, 0.01, 0

Battery Current: 0, 1, -4096

Load Current: 0, 1, -4096

Solar Voltage: 0, 0.01, 0

Solar Current: 0, 1, -4096

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)