This is the latest recevied telemetry packets stored in our database for station/object VA2AIG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Ibat* | Text* | Pres* | Humd* |
|---|---|---|---|---|---|
| 1732304555 | 3.85 Volt | 0 ma | 6.6 C | 96060 Pa | 86 % |
| 1732303807 | 3.85 Volt | 0 ma | 6.4 C | 96060 Pa | 86 % |
| 1732303350 | 3.85 Volt | 0 ma | 6.3 C | 96060 Pa | 86 % |
| 1732302143 | 3.85 Volt | 0 ma | 6.6 C | 96080 Pa | 86 % |
| 1732302007 | 3.85 Volt | 0 ma | 6.5 C | 96080 Pa | 86 % |
| 1732300944 | 3.85 Volt | 0 ma | 6.3 C | 96060 Pa | 86 % |
| 1732300207 | 3.85 Volt | 0 ma | 6.7 C | 96060 Pa | 85 % |
| 1732299744 | 3.85 Volt | 0 ma | 7 C | 96060 Pa | 85 % |
| 1732298543 | 3.85 Volt | 0 ma | 7.1 C | 96060 Pa | 85 % |
| 1732298407 | 3.85 Volt | 0 ma | 7.1 C | 96060 Pa | 85 % |
| 1732297340 | 3.85 Volt | 0 ma | 7.1 C | 96080 Pa | 85 % |
| 1732296607 | 3.85 Volt | 0 ma | 6.8 C | 96100 Pa | 85 % |
| 1732296140 | 3.85 Volt | 0 ma | 7.5 C | 96100 Pa | 84 % |
| 1732294932 | 3.85 Volt | 0 ma | 7.3 C | 96120 Pa | 85 % |
| 1732294807 | 3.85 Volt | 0 ma | 7.2 C | 96120 Pa | 85 % |
| 1732293726 | 3.85 Volt | 0 ma | 6.6 C | 96140 Pa | 86 % |
| 1732293007 | 3.84 Volt | 0 ma | 6.3 C | 96160 Pa | 87 % |
| 1732292526 | 3.84 Volt | 0 ma | 6.3 C | 96160 Pa | 87 % |
| 1732291324 | 3.85 Volt | 0 ma | 6.8 C | 96160 Pa | 87 % |
| 1732291207 | 3.85 Volt | 0 ma | 6.5 C | 96160 Pa | 87 % |
| 1732290121 | 3.84 Volt | 0 ma | 5.8 C | 96180 Pa | 88 % |
| 1732289405 | 3.84 Volt | 0 ma | 5.8 C | 96180 Pa | 88 % |
| 1732288922 | 3.83 Volt | 0 ma | 5.8 C | 96200 Pa | 88 % |
| 1732287713 | 3.83 Volt | 0 ma | 5.7 C | 96200 Pa | 89 % |
| 1732287604 | 3.83 Volt | 0 ma | 5.5 C | 96200 Pa | 89 % |
*Used Equation Coefficients:
Vbat: 0, 0.01, 0
Ibat: 0, 1, -2000
Text: 0, 0.1, -50
Pres: 0, 20, 0
Humd: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)