This is the latest recevied telemetry packets stored in our database for station/object OR7F-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Temperature* | Humidity* | Value5* |
|---|---|---|---|---|---|
| 1732287299 | 14 Nr | 12.48 Vdc | 3.24 deg.C | 65 % | 0 |
| 1732283699 | 16 Nr | 12.48 Vdc | 2.58 deg.C | 65 % | 0 |
| 1732280093 | 17 Nr | 12.48 Vdc | 2 deg.C | 65 % | 0 |
| 1732276487 | 15 Nr | 12.5 Vdc | 1.52 deg.C | 65 % | 0 |
| 1732272881 | 12 Nr | 12.52 Vdc | 1.18 deg.C | 65 % | 0 |
| 1732269281 | 16 Nr | 12.53 Vdc | 0.92 deg.C | 65 % | 0 |
| 1732265681 | 15 Nr | 12.55 Vdc | 0.78 deg.C | 65 % | 0 |
| 1732262075 | 15 Nr | 12.57 Vdc | 0.8 deg.C | 65 % | 0 |
| 1732254875 | 15 Nr | 12.62 Vdc | 0.94 deg.C | 65 % | 0 |
| 1732247675 | 10 Nr | 12.66 Vdc | 1.42 deg.C | 65 % | 0 |
| 1732240469 | 14 Nr | 12.7 Vdc | 2.14 deg.C | 65 % | 0 |
| 1732233269 | 15 Nr | 12.77 Vdc | 2.6 deg.C | 69 % | 0 |
| 1732208068 | 13 Nr | 12.55 Vdc | 2.38 deg.C | 64 % | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Temperature: 0, 0.02, -50
Humidity: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)