This is the latest recevied telemetry packets stored in our database for station/object K7LHR-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1731092506 | 483 | 612 | 0 | 0 | 0 |
1731092029 | 482 | 610 | 0 | 0 | 0 |
1731091432 | 474 | 607 | 0 | 0 | 0 |
1731090359 | 469 | 604 | 0 | 0 | 0 |
1731089523 | 467 | 602 | 0 | 0 | 0 |
1731088212 | 461 | 601 | 0 | 0 | 0 |
1731086779 | 456 | 598 | 0 | 0 | 0 |
1731085467 | 453 | 596 | 0 | 0 | 0 |
1731083797 | 449 | 594 | 0 | 0 | 0 |
1731083677 | 449 | 594 | 0 | 0 | 0 |
1731082126 | 442 | 592 | 0 | 0 | 0 |
1731081888 | 441 | 591 | 0 | 0 | 0 |
1731080965 | 439 | 589 | 0 | 0 | 0 |
1731076996 | 427 | 581 | 0 | 0 | 0 |
1731074968 | 425 | 580 | 0 | 0 | 0 |
1731074252 | 424 | 580 | 0 | 0 | 0 |
1731073894 | 424 | 580 | 0 | 0 | 0 |
1731073655 | 424 | 580 | 0 | 0 | 0 |
1731073536 | 424 | 580 | 0 | 0 | 0 |
1731073416 | 424 | 580 | 0 | 0 | 0 |
1731073297 | 424 | 580 | 0 | 0 | 0 |
1731073178 | 424 | 580 | 0 | 0 | 0 |
1731073058 | 425 | 580 | 0 | 0 | 0 |
1731072939 | 426 | 581 | 0 | 0 | 0 |
1731072820 | 424 | 581 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)