This is the latest recevied telemetry packets stored in our database for station/object MB7UHT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp_Int* | Temp_Ext* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1732312675 | 2.3 deg.C | 2.3 deg.C | 0 | 0 | 0 |
1732311475 | 2.4 deg.C | 2.4 deg.C | 0 | 0 | 0 |
1732310275 | 2.3 deg.C | 2.4 deg.C | 0 | 0 | 0 |
1732309075 | 2.4 deg.C | 2.4 deg.C | 0 | 0 | 0 |
1732307875 | 2.3 deg.C | 2.4 deg.C | 0 | 0 | 0 |
1732306674 | 2.3 deg.C | 2.2 deg.C | 0 | 0 | 0 |
1732305475 | 2.2 deg.C | 2.3 deg.C | 0 | 0 | 0 |
1732304274 | 2.4 deg.C | 2.3 deg.C | 0 | 0 | 0 |
1732303075 | 2.6 deg.C | 2.4 deg.C | 0 | 0 | 0 |
1732301875 | 2.6 deg.C | 2.7 deg.C | 0 | 0 | 0 |
1732300675 | 2.8 deg.C | 2.7 deg.C | 0 | 0 | 0 |
1732299475 | 2.7 deg.C | 2.7 deg.C | 0 | 0 | 0 |
1732298274 | 3.6 deg.C | 2.9 deg.C | 0 | 0 | 0 |
1732297075 | 3.4 deg.C | 3.3 deg.C | 0 | 0 | 0 |
1732295875 | 3.3 deg.C | 3.4 deg.C | 0 | 0 | 0 |
1732294675 | 3.3 deg.C | 3.3 deg.C | 0 | 0 | 0 |
1732293475 | 3.5 deg.C | 3.3 deg.C | 0 | 0 | 0 |
1732292275 | 3.8 deg.C | 3.7 deg.C | 0 | 0 | 0 |
1732291075 | 4 deg.C | 3.6 deg.C | 0 | 0 | 0 |
1732289874 | 4.4 deg.C | 4.2 deg.C | 0 | 0 | 0 |
1732288675 | 4.7 deg.C | 4.6 deg.C | 0 | 0 | 0 |
1732287475 | 5.2 deg.C | 4.9 deg.C | 0 | 0 | 0 |
1732286275 | 5.5 deg.C | 5.4 deg.C | 0 | 0 | 0 |
1732285075 | 5.5 deg.C | 5.5 deg.C | 0 | 0 | 0 |
1732283874 | 6.1 deg.C | 5.8 deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp_Int: 0, 0.1, 0
Temp_Ext: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)