This is the latest recevied telemetry packets stored in our database for station/object SQ9P-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | rx_cnt* | loss* | rx_tx* | napiecie* | temp* |
---|---|---|---|---|---|
1720342910 | 142 cnt | 225 cnt | 5 cnt | 3.55 V | 27 deg.C |
1720342032 | 139 cnt | 203 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720341160 | 137 cnt | 181 cnt | 3 cnt | 3.56 V | 27 deg.C |
1720340288 | 127 cnt | 161 cnt | 0 cnt | 3.56 V | 28 deg.C |
1720339416 | 124 cnt | 145 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720338544 | 122 cnt | 134 cnt | 4 cnt | 3.56 V | 27 deg.C |
1720337678 | 120 cnt | 122 cnt | 2 cnt | 3.56 V | 28 deg.C |
1720336800 | 119 cnt | 106 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720335928 | 117 cnt | 91 cnt | 2 cnt | 3.56 V | 27 deg.C |
1720335056 | 112 cnt | 80 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720334184 | 111 cnt | 71 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720333312 | 106 cnt | 61 cnt | 0 cnt | 3.56 V | 28 deg.C |
1720332446 | 105 cnt | 53 cnt | 2 cnt | 3.56 V | 27 deg.C |
1720331568 | 101 cnt | 39 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720329824 | 84 cnt | 241 cnt | 2 cnt | 3.56 V | 27 deg.C |
1720328952 | 80 cnt | 221 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720328080 | 79 cnt | 213 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720326336 | 71 cnt | 193 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720325464 | 67 cnt | 182 cnt | 3 cnt | 3.56 V | 28 deg.C |
1720324592 | 64 cnt | 169 cnt | 0 cnt | 3.56 V | 28 deg.C |
1720323720 | 60 cnt | 155 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720322848 | 59 cnt | 141 cnt | 0 cnt | 3.56 V | 28 deg.C |
1720321982 | 57 cnt | 126 cnt | 0 cnt | 3.56 V | 28 deg.C |
1720321104 | 56 cnt | 115 cnt | 0 cnt | 3.56 V | 27 deg.C |
1720320232 | 53 cnt | 104 cnt | 0 cnt | 3.56 V | 28 deg.C |
*Used Equation Coefficients:
rx_cnt: 0, 1, 0
loss: 0, 1, 0
rx_tx: 0, 1, 0
napiecie: 0, 0.01569, 0
temp: 0, 1, -128
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)