This is the latest recevied telemetry packets stored in our database for station/object CE3WIT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732569147 | 4.39 VDC | 0 | 0 | 0 | 0 |
| 1732568246 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1732567346 | 4.28 VDC | 0 | 0 | 0 | 0 |
| 1732566446 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1732565546 | 4.68 VDC | 0 | 0 | 0 | 0 |
| 1732564646 | 4.36 VDC | 0 | 0 | 0 | 0 |
| 1732563746 | 4.28 VDC | 0 | 0 | 0 | 0 |
| 1732562846 | 4.52 VDC | 0 | 0 | 0 | 0 |
| 1732561946 | 4.33 VDC | 0 | 0 | 0 | 0 |
| 1732561046 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1732560146 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1732559245 | 4.77 VDC | 0 | 0 | 0 | 0 |
| 1732558345 | 4.7 VDC | 0 | 0 | 0 | 0 |
| 1732557445 | 4.43 VDC | 0 | 0 | 0 | 0 |
| 1732556545 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1732555645 | 4.4 VDC | 0 | 0 | 0 | 0 |
| 1732554745 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1732553845 | 4.4 VDC | 0 | 0 | 0 | 0 |
| 1732552945 | 4.64 VDC | 0 | 0 | 0 | 0 |
| 1732552045 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1732551145 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1732550244 | 4.82 VDC | 0 | 0 | 0 | 0 |
| 1732549344 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1732548444 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1732547544 | 4.83 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)