This is the latest recevied telemetry packets stored in our database for station/object DC4HF-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Batteryvoltage* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719881954 | 6230 | 5 | 0 | 0 | 0 |
1719880991 | 6238 | 5 | 0 | 0 | 0 |
1719880029 | 6223 | 5 | 0 | 0 | 0 |
1719879066 | 6229 | 5 | 0 | 0 | 0 |
1719878104 | 6247 | 4 | 0 | 0 | 0 |
1719877141 | 6244 | 4 | 0 | 0 | 0 |
1719876179 | 6245 | 4 | 0 | 0 | 0 |
1719875216 | 6243 | 4 | 0 | 0 | 0 |
1719874254 | 6246 | 4 | 0 | 0 | 0 |
1719873291 | 6239 | 4 | 0 | 0 | 0 |
1719872328 | 6244 | 4 | 0 | 0 | 0 |
1719871366 | 6244 | 4 | 0 | 0 | 0 |
1719870403 | 6248 | 4 | 0 | 0 | 0 |
1719869501 | 6246 | 4 | 0 | 0 | 0 |
1719868598 | 6247 | 4 | 0 | 0 | 0 |
1719867635 | 6250 | 4 | 0 | 0 | 0 |
1719866673 | 6250 | 4 | 0 | 0 | 0 |
1719865710 | 6258 | 4 | 0 | 0 | 0 |
1719864748 | 6257 | 4 | 0 | 0 | 0 |
1719863785 | 6255 | 4 | 0 | 0 | 0 |
1719862823 | 6267 | 4 | 0 | 0 | 0 |
1719861860 | 6271 | 4 | 0 | 0 | 0 |
1719860898 | 6259 | 4 | 0 | 0 | 0 |
1719859935 | 6258 | 4 | 0 | 0 | 0 |
1719858973 | 6274 | 4 | 0 | 0 | 0 |
*Used Equation Coefficients:
Batteryvoltage: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)