This is the latest recevied telemetry packets stored in our database for station/object UB0JBX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | LoadAvg5m* | MemUsed* | Temp* | AudioLvl* | Value5* |
|---|---|---|---|---|---|
| 1732311646 | 0.8 | 9 % | 49 C | 97 | 0 |
| 1732310747 | 0.8 | 9 % | 49 C | 96 | 0 |
| 1732309846 | 0.8 | 9 % | 49 C | 97 | 0 |
| 1732308946 | 0.9 | 9 % | 49 C | 97 | 0 |
| 1732308047 | 0.8 | 9 % | 49 C | 97 | 0 |
| 1732307146 | 0.9 | 9 % | 49 C | 96 | 0 |
| 1732306247 | 0.8 | 9 % | 49 C | 97 | 0 |
| 1732305347 | 0.8 | 9 % | 49 C | 97 | 0 |
| 1732304446 | 0.8 | 9 % | 49 C | 96 | 0 |
| 1732303547 | 0.9 | 9 % | 49 C | 97 | 0 |
| 1732302646 | 0.8 | 9 % | 48 C | 96 | 0 |
| 1732301746 | 0.3 | 9 % | 48 C | 96 | 0 |
| 1732301676 | 0.2 | 8 % | 45 C | 0 | 0 |
| 1732300776 | 0.5 | 9 % | 49 C | 97 | 0 |
| 1732300706 | 0.5 | 8 % | 47 C | 0 | 0 |
| 1732299806 | 0.8 | 9 % | 49 C | 96 | 0 |
| 1732298907 | 0.6 | 9 % | 49 C | 97 | 0 |
| 1732298837 | 0.5 | 8 % | 47 C | 0 | 0 |
| 1732297938 | 0.9 | 9 % | 49 C | 96 | 0 |
| 1732297038 | 0.9 | 9 % | 49 C | 97 | 0 |
| 1732296137 | 0.3 | 9 % | 48 C | 97 | 0 |
| 1732296068 | 0.3 | 8 % | 45 C | 0 | 0 |
| 1732295168 | 0.8 | 9 % | 49 C | 96 | 0 |
| 1732294268 | 0.8 | 9 % | 49 C | 96 | 0 |
| 1732293368 | 0.8 | 9 % | 48 C | 96 | 0 |
*Used Equation Coefficients:
LoadAvg5m: 0, 0.1, 0
MemUsed: 0, 1, 0
Temp: 0, 1, 0
AudioLvl: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)