This is the latest recevied telemetry packets stored in our database for station/object W4KEL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1732284067 | 13.6 | 7.54 | 0 | 0 | 0 |
1732282267 | 13.62 | 6.07 | 0 | 0 | 0 |
1732280467 | 13.62 | 7.05 | 0 | 0 | 0 |
1732278667 | 13.62 | 6.07 | 0 | 0 | 0 |
1732276867 | 13.62 | 6.56 | 0 | 0 | 0 |
1732275068 | 13.62 | 7.05 | 0 | 0 | 0 |
1732271468 | 13.6 | 7.05 | 0 | 0 | 0 |
1732269668 | 13.6 | 7.05 | 0 | 0 | 0 |
1732267868 | 13.6 | 7.05 | 0 | 0 | 0 |
1732266069 | 13.6 | 7.05 | 0 | 0 | 0 |
1732264269 | 13.6 | 7.54 | 0 | 0 | 0 |
1732262469 | 13.6 | 7.54 | 0 | 0 | 0 |
1732260668 | 13.6 | 7.54 | 0 | 0 | 0 |
1732258868 | 13.6 | 8.03 | 0 | 0 | 0 |
1732257069 | 13.57 | 8.51 | 0 | 0 | 0 |
1732253469 | 13.57 | 8.51 | 0 | 0 | 0 |
1732249870 | 13.54 | 9.49 | 0 | 0 | 0 |
1732244471 | 13.54 | 10.47 | 0 | 0 | 0 |
1732240870 | 13.48 | 11.45 | 0 | 0 | 0 |
1732239070 | 13.48 | 11.45 | 0 | 0 | 0 |
1732237271 | 13.48 | 11.94 | 0 | 0 | 0 |
1732233672 | 13.48 | 13.89 | 0 | 0 | 0 |
1732231872 | 13.42 | 14.38 | 0 | 0 | 0 |
1732230073 | 13.39 | 14.87 | 0 | 0 | 0 |
1732228273 | 13.36 | 15.36 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)