This is the latest recevied telemetry packets stored in our database for station/object HG8LXL-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732284141 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1732284097 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1732284074 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1732284040 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1732284015 | 4.65 VDC | 0 | 0 | 0 | 0 |
| 1732283992 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1732283928 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1732283903 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1732283797 | 4.64 VDC | 0 | 0 | 0 | 0 |
| 1732283772 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1732283709 | 4.65 VDC | 0 | 0 | 0 | 0 |
| 1732283684 | 4.64 VDC | 0 | 0 | 0 | 0 |
| 1732283659 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1732281955 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1732281930 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1732281906 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1732281846 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1732281823 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 1732281282 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 1732281256 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1732281227 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1732281193 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 1732281170 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1732251232 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1732251209 | 4.77 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)