This is the latest recevied telemetry packets stored in our database for station/object LZ1GSP-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1731597064 | 3.2 VDC | 0 | 0 | 0 | 0 |
| 1731596161 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1731595258 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1731594355 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1731593452 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1731592549 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1731591646 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1731590708 | 3.67 VDC | 0 | 0 | 0 | 0 |
| 1731589805 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1731587935 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1731582504 | 3.75 VDC | 0 | 0 | 0 | 0 |
| 1731581592 | 3.77 VDC | 0 | 0 | 0 | 0 |
| 1731579426 | 3.78 VDC | 0 | 0 | 0 | 0 |
| 1731579303 | 3.78 VDC | 0 | 0 | 0 | 0 |
| 1731578677 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1731578022 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1731577119 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1731575701 | 3.8 VDC | 0 | 0 | 0 | 0 |
| 1731574798 | 3.8 VDC | 0 | 0 | 0 | 0 |
| 1731571492 | 3.81 VDC | 0 | 0 | 0 | 0 |
| 1731570589 | 3.85 VDC | 0 | 0 | 0 | 0 |
| 1731569686 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1731568783 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1731567880 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1731566977 | 4 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)